Multipath

Configurar Multipath

Introducción

Continuando con anteriores LABs vamos a implementar Multipath, sobre iSCSI en el Pacemaker que configuramos aqui Pacemaker .

Aunque el orden correcto para montar esta infraestructura deberia ser la siguiente, vamos a implementar el Multipath ahora para mejorar la capa HA.

• iSCSI
• multipath
• LVM
• filesystem
• cluster (si aplica)

Requisitos Previos

Configuración de red

Para usar multipath se necesita que las LUNs venga por varios Paths, por tanto es imprescindible tener dos IP en el iSCSI target:

[root@icecube network-scripts]# nmcli
enp0s3: connected to enp0s3
        "Intel 82540EM"
        ethernet (e1000), 08:00:27:F3:3C:51, hw, mtu 1500
        ip4 default
        inet4 192.168.1.80/24
        route4 192.168.1.0/24 metric 100
        route4 default via 192.168.1.1 metric 100
        inet6 fe80::a00:27ff:fef3:3c51/64
        route6 fe80::/64 metric 1024

lo: connected (externally) to lo
        "lo"
        loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536
        inet4 127.0.0.1/8
        inet6 ::1/128
        route6 ::1/128 metric 256

DNS configuration:
        servers: 8.8.8.8
        interface: enp0s3

Use "nmcli device show" to get complete information about known devices and
"nmcli connection show" to get an overview on active connection profiles.

Consult nmcli(1) and nmcli-examples(7) manual pages for complete usage details.

[root@icecube network-scripts]# nmcli -f NAME,DEVICE con show --active
NAME    DEVICE
enp0s3  enp0s3
lo      lo

[root@icecube network-scripts]# nmcli con mod enp0s3 +ipv4.addresses 192.168.1.79/24

[root@icecube network-scripts]# nmcli device reapply enp0s3
Connection successfully reapplied to device 'enp0s3'.

[root@icecube network-scripts]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 08:00:27:f3:3c:51 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.80/24 brd 192.168.1.255 scope global noprefixroute enp0s3
       valid_lft forever preferred_lft forever
    inet 192.168.1.79/24 brd 192.168.1.255 scope global secondary noprefixroute enp0s3
       valid_lft forever preferred_lft forever
    inet6 fe80::a00:27ff:fef3:3c51/64 scope link noprefixroute
       valid_lft forever preferred_lft forever
[root@icecube network-scripts]#